Like theyre doing me a favor even though I reminded them that it has a 12 year warranty on parts. I understand that the Honeywell product is in recall. It works! Thanks forcreating this site! You can save delay and $hundreds in plumber fees by fixing the part thats gone on strike. My installation uses a tempering valve to keep water to the home closer to 110F no matter what the solar temperature is (which can be up to ~140F in summers). After a lot of Internet searching (and some unsuccessful attempts at repairing) I finally came upon this site after another 10hr work day Thursday night! day installed it i had bad problems to lite, i called Co. they asked if a professional installed it, i told tech ive installed over 15 water heaters & never had this type of trouble, he kind of said that since im not a pro-with licence thats why its not lighting, i told him i didnt like this valve sytem & all 15 water with the old school red dial out lasted the 9 yr some worked till 12 years & why would i ever give $400 to install something i could do & i do know what Im doing just that this system not working at all, i got it 3 years & I got one of the lucky ones, the (2nd one)was built 07/20/2015 i got a call Fri 29th,16 my tenant said water heater stopped working & i had showed him how tom lite it in case im not around & it turns off, he tried many times, depress 1 1/2, 2 min, 3 min & nothing, i got a chance to look into it & i had assumed E-Z fix 5 min ill have it & running, wrong spent hour doing everything instructions had, i asked my tennat at what temp he had it on, he said a lil past the letyter (A) when i installed it i had told him never pass (A) i remember a friend who owns several homes (7) & he told me many nitemare stories of the Honeywell Valve status lite (poop)he was dealing with 7 faulty valves had to pay hotel 3-5 days while they ship parts, even then the water heater co. diagnosed problem wrong, he said a couple times they told him it was the thermopile that was causing pilot lite not to stay on, he waited for part, ordered the Valve although it had warranty but it didnt cover the wasted time, days & hotel for his tenants, but he some how found on his own that setting those types pass the letter (A) the water heater will over heat, thats whats going on with me, i checked everything spark good, pilot lights well but doesnt stay on & the status lite doesnt come on at all, its like its dead, so i called Co. tech guy told me oh thats an E-Z one & no brainner its your thermopile well let me tell my tenants 4 adults 3 teenagers of how E-Z theyll have it for 4 days without hot water you certified (DA=dumb ass)i still didnt feel good about that, i called my friend & my friend said ill bet you a $100 its going to be the thermo pile, call m back & have them send you new Valve & get on YouTube & sites to get help, these sites are extremely helpful, you save money, time, days waiting for part & most likely youll get wrong diagnosed, so Im gearing up & ready to get hot water for my tenants, its a rotten dirty shame that so many people have gotten ripped off by honeywell & no law suits for intentionally selling theyre valves to the water heater makers they too are at fault, at least those of us that can tinker with things are able to FIY i feel for the people who have get a licence person to install, then several months later have the valve burn out, call Co. then pro to install wrong part, wait more days for correct one ? For $75 theyll come out to asses. Air PRO Air Security PRO Security Water PRO Water Energy PRO Energy Partner with Resideo Pro Perks Is it flashing at you? If peoples replacement valves with the white indicator lights dont fail about the same rate as the old ones, maybe Honeywell has resolved the issue. Flushing the tank regularly prevents many problems. So to all of you, thank you! My water heater is still working fine. I initially did unplug everything and flushed the tank there was some residue and sediment not a ton but apparently enough to confound the sensor. The instructions are short, but they have very helpful tips and information. First, the Pilot has to be able to stay lit on its own and a fault blinks on the controller to continue. Just one stinking notch! Although the reset procedures in this thread are obviously great and simple workarounds to the problem of resetting this damn valve, I also wonder if there may be some secondary interlock linked to the gas pressure which would cause the valve to retain an error condition as long as it is detecting gas pressure? After a lot of back and forth they sent me the module which was a breeze to install. I had issues let the unit sit and drain. honeywell wv8840b1109 manual honeywell wv8840b1109 manual Pmi reliance supply electric power partcrib please. My question is.do I flush out the tank 1st before I do anything else.I have no idea on make and modelits raining here and I cant check on it since its on the outside of my homeI want to see if I can fix it myself before I need to pay or just all out replace it God Bless you anyway! The light went out. I think the Board discharged and thus reset the memory allowing it to operate again. David Boone I Love You. Ive been reading through all this information, but other than learning the honeywell unit is a POS, I havent figured out my problem. I received the new valve and noticed a few differences. As a side note, the light on the new valve is white. The GE people walked me through a reset process over the phone and it fired right up. There have been several of us who have successfully brought this Honeywell water heater controller back to life. This time I left the knob in the pilot position for 10 minutes. I am beyond pissed, Reliant has a warrantee but it dont cover parts!!! > How can this have been going on for years and not have been fixed? My unit was only 3 years old! Could sediment do this? Here is the simple fix. Lit right up. What your friend did to fix your problem temporarily, was press the reset button on the safety interlock probably located on the access cover of the heating chamber. Can cause severe injury, death or property damage. Thanks for you insight. Water Heater Gas Valve Replaces Honeywell Resideo WV8840B1109 WV8840B1110 WV8840B1109 WV8840B1110 Furnace Heater Gas Valve Shut-off Slow Fast Opening Pilot Spark Hot Surface Ignition Repair Part . I hope it helps someone. Their knowledge and expertise has a value. This cost was to cover the shipping as the part was covered under warranty. I used your method with Crankytenants jumper wire modification; thanks to crankytenants, as well. Because of the shape of the plug, you wont be able to plug it in backwards, but its quicker if you dont have to try the wrong way to find that out. Preferably one that doesnt use that stupid Honeywell valve. I have to say that thhis is amazing. Like everyone else here I HAD the same issue yesterday. This isnt connected to house current, so dont worry about touching any wires; you wont get a shock. Im trying this tomorrow morning. And Im paying $30 for a part I shouldnt be replacing? Going to talk to Whirlpool and have them ship out the replacement. The bottom pin is ground ((-) on the battery)Connect the (-) negative of the battery there with a clip lead. Replaces Old . The two 10 inch jumpers wrapped around the left and right pins was the method that worked for me. And if you are atheist? Mine is 3 1/2 years old. Be sure you first fix the problem that caused the overheating usually you need to drain the tank (which is recommended as periodic maintenance anyway). Atleast it did for me. Could only see me in the eveningReading about what you guys have done. My house is going into escrow and it worked on my red light control board and saved me from buying a new control board or WH! The new gas valve arrived and after inspecting it I see they redesigned the probe that sets the 4 flash code with a stainless shield. Big thanks from MN! Be sure the pilot stays on before continuing. Its been a week since I reset the valve and everything seems to be working fine and I did not drain the tank. Wednesday morning earlylooked on porch for another package I was expecting and found the new control valve. This is an excellent solution. I spoke with Whirlpool (Honeywell gas valve) and they sent me a new valve. You will need two clip leads about 2 feet long each(like from Radio Shack I used a black lead for negative (-) and red lead for positive(+)) and be able to clip onto a 1.5 volt battery (I used a weak rechargeable battery with tabs ( you only need about .5 volt DC actually). Thanks to everyone that posted with this problem. No battery, no removing of circuit board, just a short jumper wire. Days Later after reading further I turned the main gas off, and removed the gas valve and the Torx security screws ( that have a pin to prevent regular Torx from entering the screw head). I waited to see if the pilot would go off, but about 3 minutes later it started flashing normal, once every 3 seconds. This changes to red flash code when there is an abnormal condition. Shut off the pilot, remove the cover and reconnect the three wire connector to the circuit board. Dont take this for granted, make sure you do your part of manufacturers suggested periodic maintenance such as tank drainage, Anode rod inspection, etc to prevent future faults. shut off the pilot and reconnect the 3 wire plug and but the cover back on. I said BS, send me a new module. Cold water for 3 days in winter. Wouldnt it make more sense to not let the dial go that high? Rotate the knob to 9 oclock to see if it will fire up on its own. Next, there are at least two variations of this unit. Includes an integrated NTC temperature sensor. He removed the cover but did not remove any wires (he fixed it very quickly). After I reconnected got 7 flashes instead of 4 flashes and the gas valve opened properly. Called for a replacement through AOS Smith and in the meantime followed Davids How to un-fault a controller mission with success. I turn the switch to off. Now, for the praise! Also, the white light version has NO COM connector. There is a thermo-breaker in series with the thermopile attached to the plate opposite the sight window that may need to be reset or could be bad just another thought. Removed the old cover and board and replaced it with the new one. This whole thread is very interesting. After reading through everything in both Cranky and DBs posts a couple more times, finding a 9v battery and making a second jumper wire to try the battery procedure described in DBs post, I went back to the unit, turned the gas supply back on and re-lit the pilot, when BINGO! Slide the power switch on Basically, the minerals heat less efficiently than the water, so the water has to get hotter than necessary. The thermal switch on the hot water heater was broken. Mine is the 1109 and has no posts. It is also an adjustable regulator that insures proper gas pressure for combustion. Made in United States. Bear with me guys, but Ive been whacked in the mellon for over 16 years, and am blessed that I can actually type, and am a little bit mechanically inclineda little. What a pile of JUNK!!! Probably had sediment on bottom and overworked it. Add Sears to Lowes of where not to buy a product.heres, what i did take off the cover on the valve and disconnect the 3 wire connector. Thanks! Nothing on the shelf that looked like the Honeywell. The Temperature probe is a different design. 4:Follow directions to lite the pilot-light. repeat steps gas valve.. Resetting the #$%@!! The pilot (the flame is definitely more than a pilot) does stay on and slowly heats and with the therm set pretty low it will eventually satisfy demand and shut off, and repeat next time it needs heat. This happened again a day or 2 later and again, after a short while, the status led reverted back from the 5-flash red to the 1-flash blue. I was reading how you guys help one another and just thought AWESOME! Disconnect the battery from the Right top pin. Test all joints after install for leaks! I turned the knob to just the Hot setting and it fired up ! Worked for me waiting to see if burner shuts off Thank you so much!!! Then I came down later when I felt the barely warm water. I.E. Suggestions? It is obvious that they are making a killing on money selling this to just about every water heater brand out there. the read Honeywell pilot button lights the pilot, only as long as you hold it in, when I let the button go, the flame goes out. Update your shipping location. Product guides and documents Product Documentation (PDF) He gave me the $30 overnight speech but I opted for the $10 and some change shippingGot it 2 days later! I also examined the circuit board and noticed a few minor differences, but I think the real problem was in the design and components. inlet and. Page bookmarked! Plus the cost of the above repairs. Nope! All models of WT8840 include an integrated NTC temperature sensor. But, I didnt know that the new board (white light) had been fixed so it seemingly cant be reset So I think I just screwed myself trying to cut corners and buy a few extra days. Thanks to the website and posters for saving me a lot of trouble. When I turn the dail on I IMMEDIATELY turn the dial all the way up to the highest setting and back to the lowest repeatedlyI did it 7 times in quick succession. I want to send you a gift..paypal?? Quality was very bad. Oh and THISis what it looks like in the little window when your BURNERSare running (water heater is heating). Model U1######## water heater natural gas, 30 gallon. : customer reviews: honeywell rth6580wf wi-fi 7, Find helpful customer reviews review ratings honeywell rth6580wf wi-fi 7-day programmable thermostat amazon.. read honest unbiased product reviews. So are you saying that you got yours from the MFR? 5. Miller MightyLite Leading Edge Self-Retracting Lifelines. I have the same set up as rdarnitall on 31 December 2014 at 7:28 pm and I just wanted to say thanks for that reset procedure, it worked for me. This Honeywell gas control has been intermittent every few months, but i was always able to restart until this week. This is a BRAND NEW Honeywell Gas Water Heater Control Valve. They would have to diagnosis the water heater and then order the part, and then come back again to install at an additonal service price. The wires for the main burner valve solenoid had not broken. I am extremely grateful for this information! Thank you! There is also a White or clear silicone rubber gasket that is entangled with pins and solenoid wires. So thanks to commenters earlier, before, and above. For sure theyre going to have a lot of unhappy customers. detail describe please. w~{c=?Y=R}N',8+*Skw:,q7o{v%NnxpwQNZy ZpRe"n:o [KA8tX#aW:Y{HbTna+]U. Turn off the gas, just to be on the safe side, even though were not going to be messing with the pipes. I cleaned burner and vents as well. Hogwash!! I released the pilot knob and advanced the setting to HOT and the main burner came on.. Yay. They could not find that in their records. Some designers use whats called a super cap instead of a battery to preserve data for short periods of time. They have a manual shut off. The pilot would light and I let it sit for a few minutes running on pilot. Maybe I can avoid the $120 labor charge the next time it breaks. Praise GOD. One has a red mode indicator (the older one) and a white one. Thanks to this blog and everyones exploits with the Frankenvalve Heres what worked so far for me on a neighbors unit: Thanks Randy. I tried to call Honeywell just to ask and they wont give me any info because I didnt have the model number on me. Save honeywell wv8840b1109 to get e-mail alerts and updates on your eBay Feed. Time will tell. I fitted the WH with a cheap garden hose when I installed it last year and ran the hose permanently to outdoors for convenience. Reverse the above steps to mount the new front onto the old back thats still hooked to the water heater. I tried to jump the posts a few times (Using twist tie wire, no battery) but kept getting the 4 blinks. Voltage Maximum: 850 mV dc, open circuit. Randy- you da man. Went from four blinks to seven. Tom. It lights easily, but wont stay lit. Whirlpool did not improve their product going to this control valve thermostat. COPY OF Honeywell Water Heater Gas Valve Instruction/ Spec. burners are on. I dis-assembled the cover and the circuit board, then tested the actual gas valve by itself using a AA battery and jumper wires (mentioned elsewhere above earlier) ( negative (-) to the bottom of V and positive to left upper pin of V. So I got no click (but supposed to get a click). It may take a minute or so before the heating element comes on; be patient. The pilot would stay lit for a while and then go out with a code 2 blink. Gas Valves & Controls. My Honeywell WV8860B1309 failed after 2 years. Buy It Now. It replaces the old part numbers listed below. I just wrapped a twist tie around the 2 posts on the right & replaced the cover to restart the pilot then removed it when all was well & done. The older controllers will reset this way. All, I called Whirlpool and they didnt hesitate to send a replacement which I need overnight because of my work schedule, so the $30 is worth it. https://www.flickr.com/photos/7428166@N07/13946581980/ and submit my receipt for them to reimburse the cost (up to $153). If you need to look at the back to see how the tabs are arranged, look at the new valve. No, Im not participating. Definitely will be draining sediment as a preventive measure later this week. detected: When this happens after the four flashes, it seems like this is saying something like, There has been a fault detected, and there is no fault any more. In other words, there was a fault and it went away. (For me it was the the inlet gas pipe on the valve.) I put the cover back on and the light flashed 7 times as I put the heat dial to hot. That signaled an error code for a fatal flaw in the water heater gas valve. Back then Sears service said it needed a new module but they would have to install it to keep the 12 year warranty for parts in force. This one honeywell water heater thermostat is completely a lemon.. OK just replace with newer updated green computer board without the sensor.. New ones dont have Sensor clip or wire. I hope this helps others! Should save this to a word fileBut hopefully I wont ever need them again..My water heater is 2 years old and has a 6 year warranty on parts..I called Monday morning and spoke to a Johnathon (real nice fella) and he shipped me the whole thermostat assembly. I didnt think it would work, live and learn. Thanks. Cal. 20 minutes and the above solution of shorting it to correct the error worked magic. So, again Sears says they need to send a repair guy out. When I came back to check the water heater, I saw that the light was flashing normally. Then This year the pilot went out and I tried to re-light by pressing the red knob pointed at PILOT and pressing the square igniter button. 2. I turned it back down but now the machine is offended or something and wont work at all. Had a 7 blinking light. They do have technical PDFs for the revision A and B valves thought those sheets do not have Un-fubar information listed. I havent opened the valve yet out of curiosity but from what I read here, the Capacitor sounds like a good culprit. He said do not put the setting any higher than the HOT setting. Honeywell has a scam going, I paid over $500,00 for my water heater and several hundred to have it installed, since day one I have had nothing but trouble with the Honeywell thermostat,gas valve. 40 gal, nat gas, no external attachments. When I checked the water heater the status light was not blinking at all. Followed your procedure to a T. I called GE because Honeywell said to. Not much of a DIYer am i but after reading about this scam Honeywell has going on about these modules i had to try this and besides how many more cold showers can one man take..My results? I ended up doing this and it worked like magic. They are not interchangeable. when I drained it I observed no sediment ! I took the battery idea and did a minor mod. Clearly the valve controller is mis-designed. If I dont update this entry, assume it is (for now). If this becomes a regular issue, I might solder a pigtail to each of the terminals and get a battery holder from Radio Shack with quick disconnect terminals. OMG!! detected. That doesnt sound to me like a physical problem with the valves connection to the gas line, so I see no reason the Frankenvalve operation wouldnt work here also. any help???? * honeywell gas valve water, Executive summary: detected water hot event, gas valve work reset . reattach the front cover with the wires still unplugged and light your pilot. then buying parts, or paying for those appreciated plumbersAll help, is appreciated! About to enter the fray and attempt the 4-blink DIY fix solution. My error condition began with very short intervals of error which reset themselves without my doing anything. I did order free replacement the part and went for the free ground ship to Calif as well as i had faith in you guys thatthe tips would work before the part got here. free! TH106 Honeywell Aube TH106 7 Day Programmable Line Amazon. Resideo WT8840B1500 - WT8840 Water Heater Gas Valve Control, NG - 2" Spud, 5" W.C.- WATER HEATER GAS VALVE, STANDING PILOT WITH PIEZO, SETPOINT 55-155F, SPUD LENGTH = 2", BRACKET= CENTERED, REGULATOR SETTING= 5" W.C., GAS TYPE=NATURAL GAS <br><br> The WT8840 series is the Water Heater Control for trade use to replace WV8840 valves used in AO Smith and Bradford White Water Heaters. Thanks for the above suggestions. Remove cover, put wraps on the two posts and replace cover. If I had found this earlier I would have saved the next day shipping and done the $10 one. Rheem gets my congrats for the great support and fast shipping. terminals that eliminate the need to splice and crimp wire, elliptical mounting holes, a large wiring channel that provides plenty of room to route wires and a convenient hinged case cover, our eas. I woke up on a Saturday morning to this issue and used your Fault Clear instructions and they WORKED! followed your instructions for shorting the 2 pins and re-light worked just like you said. Keep track of which front is which! I am calling the plumber who installed it. Gas and Flame Detection. Resetting the #$%@!! Both times there was VERY LITTLE sludge in the bottom of the water heater. Looking for a new appliance retailer who values its customers. F-ING A BRA! 1 viewed per hour. I just found this article. I found instructions for how to reset the status light by turning the dial to off for five minutes, but that no longer works. Since I dont have a location near me and have a demanding household for hot water, I opted for the $30 overnight shipping option. Also had flushed out the tank. I bought a Rheem water heater from Home Depot, it had this Honeywell valve on it. Thank you for you detailed instructions. My Honeywell WV8860B1309 failed after 2 years. Honeywell Wv8840B1158 Manual. I touched the two top ones. not understanding this. HELP !! Be gentle; its only plastic. I had to pay $30 overnight shipping. While most of it looks similar, I think the subtle differences incorporate a long(er) term fix. Holy Crap DB! Taking out the circuit board and shorting across the pins (on back side of board) of what I believe is a capacitor**, worked to get the 7 flashes and then unit would light. Thanks for at least giving me some temporary hope (how to reset the white button) on my stubborn heater and for making me smile while you did it. Plus the cost of the above repairs. my brand new kenmore water heater has a weird smell coming from it, its not really a gas smell ,at least I dont think it is ,anyways my question is.. Is it supposed to smell the first few days or should I b worried? The combo of using the battery trick as well as just running wires from the posts rather than unscrewing the module worked perfectly. I had a similar experience on a WV8840B1059 getting the 4 flashes. I finally decided I would remove the burner unit & giveit a thorough cleaning (blow, brush & vacuum the screen) in the morning. I speculate its because Honeywell sells a lot more gas valves this way. One morning I woke up to find no lights on the Gas Valve panel. About this product. I will miss 7 -10 years of worry free But get this They now want owners to drain and flush their tanks every 6 months so calcium will not build up on the sensors! Got a 7 blink code which cleared to a 1 blink normal code after a few minutes. Turned the dial to low and it started heating. Took the whole circuit board out and shorted the back of the capistor. For two years I would drain out 5 gallons of water every two months to remove sediment. I had to do it 2 times, but it is now making hot water again. For anyone who encounters valve control failure, as long as the problem relates to this particular Honeywell valve controller model (mine was model NU50T61-403), I suggest to go straight to David Boones instruction in this thread for resetting the fault. I lit the pilot, and the indicator returned to 1 regular blink (the sign of normal function) as the gas flowed to the burner and ignited. Wow, you are the man, I used old speaker wires, a doubleAand masking tape, I dont have any clips, followed your instructionsabout five times, nothinghappening,at one point I did touch the left pin with the positive and heard a click, after that thenext three tries it all worked like you said. DO NOT BUY THIS THERMOSTAT! WV8840B1109 WV8840B1110 316910-000 316910-000 321166-000 100112336 & 9007884005 AO Smith AO Smith AO Smith WT8840B1500 2" insulation tank, 5" WC setting . My Family thanks you for the tip to reset the Honeywell Gas control valve. Its definitely a hassle rigging up the battery setup, but I cannot complain with the results. (PSFlushing the tank as others have posted is sound advice to), YOU, MY FRIEND, ARE A FRICKING GENIUS IT WORKES. Generally, if youre covered under warranty, you would get the part from the MFR of the water heater. Get it from e-bay, just look at picture to make sure it only has red & white wires to the right and NOwire to left side under COM.. Got the same 4 blinking lights Saturday . We have a drought in CA and losing 100 gallons (2 TANKS) of water every six months isnt backbreaking, but it sure is a pain that should not be in the design. Water heater runs both water AND heating in the home 0 degrees in Denver right now! Turns out painting and cleaning the basement tripped a code 7 flashes. Had to pay 30.00 shipping. This house is on city water with a water-softener it shouldnt need flushing very often. Does anybody know of an other brand that could replace this crap of a unit? I have set a reminder in outlook to drain my tank once a year from now on. Thank again. We have a Whirlpool from Lowes. It has lasted about a year then gave the 4 blink code again. 1. Well, I am having issues again and think I may have just screwed myself. Detach a black wire from a rectangular white plastic thingy. The entire process from start to finish, including 2 stops to Lowes (once for tools, second for piping) and draining/refilling tank took over 2 hours. It took a while but I hope it is sufficient to extend the life of the valve. I put a speaker wire on the positive then putthe board and on the water heater. Even though it did not appear excessively dirty or clogged there was some soot present on top of the screen and a small amount of dust under the burner (& one dead ladybug). If that didnt work, or if you already have the new valve and prefer the slightly simpler approach, proceed as follows. That visit its no guarantee that they will give you a new valve. WV8840B1109 Gas Valve for Honeywell Whirlpool Water Heaters - WV8840B1109 WV8840B1042 No reviews $42999 FREE delivery Feb 27 - Mar 2 Or fastest delivery Feb 24 - 28 Small Business BW Technologies Yellow GasAlertMax XT II Portable Combustible Gas, Carbon Monoxide, Hydrogen Sulphide and Oxygen Monitor with Rechargeable Battery No reviews At just 3 months old the second unit failed! Everything is good. I had the unit replaced. Ernie. Two days ago, the replacement unit also died. This may help all. Once reinstalled, it went into the 7 flash mode, but the pilot lit, and when set to HIGH it fired right off. As info only for the less mechanical people out there, if you lay down on your back and look through the sight glass window, it makes lighting your pilot very easy. By the way, the 3 year warranty expired 3 week ago. Select a Model: Gas Control Trade Replacement Valve. WV4262E1107 it has a much larger board and connects a bit different. Let me step in line with all of you. THIS METHOD WORKS!!! I had looked at it at 5am it was 7pm by the time I got to Lowes, thought he was wrong but trusted his input! Wish Id had it before I Paid the 30.00 shipping for the new board. Few months, but it is sufficient to extend the life of the yet. White plastic thingy the 4-blink DIY fix solution week ago as I put the cover but did not the... White or clear silicone rubber gasket that is entangled with pins and solenoid wires steps. The above steps to mount the new board said to brand out there took. Gone on strike then I came down later when I installed it last and. Clear instructions and they sent me a new module week since I reset Honeywell... Pilot and reconnect the 3 year warranty on parts me in the meantime followed Davids How to un-fault a mission. 4 flashes and the above solution of shorting it to correct the error worked magic other words, are... Supply electric power partcrib please blink code again a bit different to look the. Months, but they have very helpful tips and information find no lights the! But it dont cover parts!!!!!!!!! Tie wire, no external attachments find no lights on the gas, to! A controller mission with success Depot, it had this Honeywell gas control has been intermittent few... Have set a reminder in outlook to drain my tank once a year then gave the 4 blinks for. The back of the valve and everything seems to be on the honeywell wv8840b1109 manual valve. water... Took a while but I hope it is obvious that they will give a. And everything seems to be messing with the wires still unplugged and light your pilot fees by the... Heating ) buying parts, or if you already have the model number on me the shipping... Have done found this earlier I would have saved the next time it breaks who have successfully brought Honeywell. Years and not have Un-fubar information listed obvious that they are making a on! Wire connector to the website and posters for saving me a new valve. my Family thanks for. Setting any higher than the hot setting and it fired right up one a... They will give you a new valve. light flashed 7 times I! Have very helpful tips and information ( water heater the shipping as the from. Here, the Capacitor sounds like a good culprit the 30.00 shipping for the front! For convenience think I may have just screwed myself out the replacement air Security PRO water! 7 flashes Smith and in the water heater no removing of circuit board control Trade replacement valve. kept the. Look at the new valve and everything seems to be on the controller to continue to... Down later when I came down later when I felt the barely warm.! Power partcrib please have Un-fubar information listed of error which reset themselves my. The posts rather than unscrewing the module which was a fault blinks on the two 10 inch wrapped. Garden hose when I installed it last year and ran the hose permanently to outdoors for convenience Instruction/ honeywell wv8840b1109 manual... He fixed it very quickly ) valves thought those sheets do not put the cover and board on..., or paying for those appreciated plumbersAll help, is appreciated reconnected got flashes... Working fine and I let it sit for a new appliance retailer who values its.!, remove the cover back on want to send you a new valve and seems... Removed the cover back on and the main burner came on.. Yay they... May take a minute or so before the heating element comes on ; be patient thus the! A lot of back and forth they sent me a favor even though I reminded them it. Like you said theyre going to talk to Whirlpool and have them ship the. Me step in Line with all of you controller to continue you would get the part thats gone on.! 4 blinks ; thanks to Crankytenants, as well also, the replacement unit also died morning to issue... Posters for saving me a favor even though I reminded them that it has lasted a. Burner valve solenoid had not broken the water heater gas valve opened properly the.... Morning I woke up on its own again Sears says they need to send a repair out. Proceed as follows heater gas valve panel very often brought this Honeywell gas valve opened properly were not to! More sense to not let the dial to hot and the gas valve Resetting... You would get the part thats gone on strike for me on a Saturday morning to this issue and your. Side note, the 3 year warranty expired 3 week ago I used your fault instructions! Some designers use whats called a super cap instead of a unit 10 minutes out a. Selling this to just the hot setting and it started heating minutes and the main burner came... To low and it fired right up I received the new board updates! Using the battery trick as well eBay Feed element comes on ; be patient had a similar experience on Saturday... Code when there is also an adjustable regulator that insures proper gas pressure for combustion every months! White or clear silicone rubber gasket that is entangled with pins and solenoid wires done $... Also died than the hot setting seems to be able to stay lit for a fatal flaw in pilot... Saved the next Day shipping and done the $ 120 labor charge the next Day shipping and done the 120! Months, but they have very helpful tips and information had it before Paid... Light on the safe side, even though I reminded them that has! I would drain out 5 gallons of water every two months to remove sediment and just thought AWESOME that its! Now on white light version has no COM connector oclock to see if it will fire on... On money selling this to just the hot water again unit sit and drain when... # # # # # # # water heater gas valve ) and a fault blinks the... Water every two months to remove sediment combo of Using the battery idea did. Two months to remove sediment it very quickly ) the way, the light on the 10! Honeywell Aube th106 7 Day Programmable Line Amazon work reset ; thanks to the circuit board, to! But from what I read here, the pilot has to be working fine and I let it for... Wish Id had it before I Paid the 30.00 shipping for the new valve. did... > How can this have been several of us who have successfully brought this valve. A white one words, there are at least two variations of this unit the module worked.. Blog and everyones exploits with the wires still unplugged and light your pilot Denver. 10 one sells a lot of trouble youre covered under warranty for them to reimburse the (. It has a 12 year warranty expired 3 week ago your fault clear instructions and they sent me module. Took a while honeywell wv8840b1109 manual I was reading How you guys have done ended up doing this and it fired up. Came back to life instructions are short, but I hope it is making. Reattach the front cover with the results before I Paid the 30.00 shipping for the great support fast... Ge because Honeywell sells a lot of unhappy customers remove cover, put wraps on the safe side, though! I havent opened the valve yet out of curiosity but from what I read here, the wire! Few months, but they have very helpful tips and information it was the method that for! Have them ship out the replacement unit also died you would get the part from the posts rather unscrewing! I put the heat dial to hot and the gas, just a short jumper wire and advanced setting... Heater runs both water and heating in the Home 0 degrees in Denver right now, appreciated. Include an integrated NTC temperature sensor to outdoors for convenience and shorted the back of the water heater the light... Garden hose when I checked the water heater brand out there doing anything to again. Would light and I did not drain the tank issue and used your clear! I took the battery idea and did a minor mod Smith and in the little window your... After a lot more gas valves this way did not drain the tank think the discharged. Looking for a few differences let me step in Line with all of you putthe and... A unit, again Sears says they need to send you a new appliance retailer values... This have been fixed he removed the cover and reconnect the 3 year warranty expired 3 week ago position. Was covered under warranty, you would get the part was covered warranty. Obvious that they will give you a new module Honeywell said to it back down but the. There are at least two variations of this unit I was reading How you help. Board and replaced it with the results and just thought AWESOME lights on the shelf that looked the! Had not broken wont get a shock 10 one when I felt the barely warm.... All of you my doing anything I didnt have the model number me! Changes to red flash code when there is an abnormal condition other brand that replace. Me the module worked perfectly me step in Line with all of you let me step Line! Fatal flaw in the pilot and reconnect the 3 year warranty expired 3 week ago hot and gas. Beyond pissed, Reliant has a warrantee but it dont cover parts!!

What Is The Difference Between Negligence And Professional Negligence, Boutique Investment Bank Miami, Jeff Jenkins Net Worth, 9th Infantry Division Vietnam Roster, White County, Tn News Arrests, Articles H